Gets or sets the access key that allows you to quickly navigate to the Web server control.

Gets the browser-specific adapter for the control.

if true, a unique number will be added every time flash loads data. Mainly this feature is useful if you set ReloadDataInterval

Whether this instance settings should be appended to settings in external settings file

Gets or sets the application-relative virtual directory of the Page or UserControl object that contains this control.

Gets the collection of arbitrary attributes (for rendering only) that do not correspond to properties on the control.

Gets or sets the background color of the Web server control.

use 0 if you are using custom swf or jpg for background

swf or jpg file of a background. Do not use progressive jpg file, it will be not visible with flash player 7. The chart will look for this file in ChartDirectory

Gradient background colors

if set to true flash background will be set to transparent

Balloon background opacity. If not set, graph.balloon_alpha will be used.

Opacity of the balloon border.

Color of the balloon border.

Width of the balloon border.

Balloon background color. If not set, graph.balloon_color will be used.

Corner radius of a balloon. If you set it greater than 0, the balloon will not display arrow.

Whether balloons are enabled

The maximum width of a balloon. If not set, half width of plot area will be used

if set to true, only one balloon at a time will be displayed

whether it will be possible to turn on or off y balloons by clicking on a legend or on a graph

Baloon text color. If not set, graph.balloon_text_color will be used.

The size of the text.

Gets the control that contains this control's data binding.

Opacity of the border [0-100]

Gets or sets the border color of the Web control.

Gets or sets the border style of the Web server control.

Gets or sets the border width of the Web server control.

Application path where the Flash control is stored

The graph type.

Gets a value that indicates whether the server control's child controls have been created.

Gets the server control identifier generated by ASP.NET.

Gets a character value representing the separator character used in the ClientID property.

Background alpha of "Collecting data" message

background color of "Collecting data" text

x position of "Collecting data" text

If set to true X position of "Collecting data" text is measured from the right side

this text is displayed while exporting chart to an image

Text color of the "Collecting data" message

Text size of the "Collecting data" message

y position of "Collecting data" text. If not set, will be aligned to the bottom of flash movie

If set to true Y position of "Collecting data" text is measured from the bottom

Colors of graphs. if the graph color is not set, color from this array will be used

If this is set to true, the graph will continue even through a point above the X-axis for which there is no value. The default is false, and the graph will stop at the previous value, starting again at the next available value.

Gets the HttpContext object associated with the server control for the current Web request.

Custom context menu items

Gets a ControlCollection object that represents the child controls for a specified server control in the UI hierarchy.

Gets the style of the Web server control. This property is used primarily by control developers.

Gets a value indicating whether a Style object has been created for the ControlStyle property. This property is primarily used by control developers.

Gets or sets the Cascading Style Sheet (CSS) class rendered by the Web server control on the client.

CSV file data separator (you need it only if you are using external CSV file for your data)

In case you are using csv data type, you can set the number of rows which should be skipped here

Gets or sets the name of the list of data that the data-bound control binds to, in cases where the data source contains more than one distinct list of data items.

Name of the field in data source representing opacity of background of the event starting at this point

Name of the field in data source representing background color of the event starting at this point

Name of the field in data source representing description of the event starting at this point

Name of the field in data source representing id of the event ending at this point

Name of the field in data source representing id of the event starting at this point

Name of the field in data source representing text color of the event starting at this point

Name of the field in data source representing if the values and grid lines of this series will always be visible

Name of the field in data source representing identifier of a series (x-axis) item

Name of the field in data source representing series item value

Gets or sets the object from which the data-bound control retrieves its list of data items.

Gets or sets the ID of the control from which the data-bound control retrieves its list of data items.

External data file type (xml or csv). Used when data loaded from external file

Decimal separator to be used in Flash

Gets a value indicating whether a control is being used on a design surface.

If your value has less digits after decimal then is set here, zeroes will be added

Gets or sets a value indicating whether the Web server control is enabled.

Gets or sets a value indicating whether themes apply to this control.

Gets or sets a value indicating whether the server control persists its view state, and the view state of any child controls it contains, to the requesting client.

The text that will be displayed if the data file is corrupt, or there is no data in the file. (If the data file is not found, or is completely empty, the error message will be “Error loading file”.)

background opacity of error message

background color of error message

Gradient error messages background colors

Specified if error message should be enabled

x position of error message. If not set, will be aligned to the center

If set to true X position of error message is measured from the right side

Text color of error messages

Text size of error messages

y position of error message. If not set, will be aligned to the center

If set to true Y position of error message is measured from the bottom

Gets a list of event handler delegates for the control. This property is read-only.

If set to true, context menu (when user right clicks on flash movie) "Export as image" will appear. This will allow user to export chart as an image. Collected image data will be posted to [ChartDirectory]/export.aspx

"Export as image" text for right click menu

Target of a window in which export file must be called (_blank, _top ...)

URL of the external data file

URL of the external settings file

Gets the font properties associated with the Web server control.

Gets or sets the foreground color (typically the color of the text) of the Web server control.

Individual graph settings and data

If set to true settings of individual graphs will be included along with graph data (otherwise graph settings are included with other chart settings)

guides are straight lines drawn through all plot area at a give value. Can also be filled with color

Gets a value indicating whether the control has attributes set.

Gets a value indicating whether the current server control's child controls have any saved view-state settings.

The opacity of the help balloon background.

The color of the help balloon background.

The text that will appear when the viewer’s mouse pointer hovers over the button.

The color of the help balloon text.

The size of the button’s text.

The width of the text in the balloon.

The opacity of the help button background.

The color of the help button background.

The horizontal position of the help button.

The text on the button.

The color of the help button text.

The color of the button’s text when the mouse pointer hovers over it.

The size of the button’s text.

The vertical position of the help button. The coordinates are counted from the upper left corner. (Coordinates are still positive, though counted downwards.)

If there are more graph points than specified here, the bullets will not be shown. This does not affect custom bullets.

Gets or sets the programmatic identifier assigned to the server control.

Gets the character used to separate control identifiers.

whether to include guides' values when calculating min and max of a chart

The background color of the vertical grid line and the X-axis balloon.

If this is set to false, all indicator functionality will be disabled.

The opacity of the vertical grid line.

If this is set to true, clicking and dragging across the chart will zoom in on that section of the chart.

Gets a value indicating whether the data-bound control has been initialized.

Gets a value indicating whether the DataSourceID property is set.

Gets a value indicating whether controls contained within this control have control state.

Gets a value indicating whether the control is enabled.

Gets a value that indicates whether the server control is saving changes to its view state.

Gets a value indicating whether view state is enabled for this control.

If this is set to true, the viewer will be able to click on the graph, or on the graph title in the legend, and show or hide the balloon for that graph.

The size of the Y-axis balloon text.

The opacity of the axis line.

The graph type for the left axis.

The color of the axis line.

If set to true, this axis will use logarithmic scale instead of linear

The length of the tick extending from the axis at a grid or data point.

The thickness of the axis line. 0 means hairline, but still visible (set alpha=0 for an invisible axis line).

The opacity of the grid lines.

The approximate number of gridlines. They will be arranged along the plot area equally, intersecting with Y-axis value points.

The color of the grid lines.

If this is set to true, the grid lines will not be continuous. They will look like a line of dashes (– – – –).

The length of each dash.

If this is set to true, horizontal grid lines will be displayed.

The opacity of the stripe fill.

Every second area between gridlines will be filled with this color (you will need to set fill_alpha > 0)

The color of the text.

If this is set to true, axis values will be shown.

The ratio of shown values to value axis grid lines. 1 means a value will be shown at every grid line; 2 means a value will be shown at every second grid line, etc. The higher the number, the less values will be shown!

If this is set to true, the values of this axis will be displayed inside the plot area.

If this is set to true, only whole values will be shown. Values with decimals will be hidden.

The maximum value of the value axis. The axis will always end at this value, even if there is no data point mapped that far.

The minimum value of the value axis. The axis will always start from this value, even if there is no data point mapped that far.

If this is set to true, the values will be reversed on the value axis – the largest value will be placed closest to the point where the category and value axes intersect. The chart will be re-plotted accordingly.

The angle of rotation for the values. You can rotate them by 90 degrees with no additional requirements. If you want to rotate the values by 1 to 89 degrees, you must have the SWF file for that font, placed in the amcolumn/fonts folder.

If this is set to true, the first value will be skipped.

If this is set to true, the last value will be skipped.

If this is set to true, the axis will stay between Min and Max values even if there are data points beyond those values. The parts of the chart that do not fit will be cropped. If this is set to false, the Min and Max values will be extended to fit the chart.

The size of the text.

A short text indicating the units of the values. This can be something like “USD” or “km/h”.

Whether the units will be shown to the left of the value or to the right.

The opacity of the axis line.

The graph type for the right axis.

The color of the axis line.

If set to true, this axis will use logarithmic scale instead of linear

The length of the tick extending from the axis at a grid or data point.

The thickness of the axis line. 0 means hairline, but still visible (set alpha=0 for an invisible axis line).

The opacity of the grid lines.

The approximate number of gridlines. They will be arranged along the plot area equally, intersecting with Y-axis value points.

The color of the grid lines.

If this is set to true, the grid lines will not be continuous. They will look like a line of dashes (– – – –).

The length of each dash.

If this is set to true, horizontal grid lines will be displayed.

The opacity of the stripe fill.

Every second area between gridlines will be filled with this color (you will need to set fill_alpha > 0)

The color of the text.

If this is set to true, axis values will be shown.

The ratio of shown values to value axis grid lines. 1 means a value will be shown at every grid line; 2 means a value will be shown at every second grid line, etc. The higher the number, the less values will be shown!

If this is set to true, the values of this axis will be displayed inside the plot area.

If this is set to true, only whole values will be shown. Values with decimals will be hidden.

The maximum value of the value axis. The axis will always end at this value, even if there is no data point mapped that far.

The minimum value of the value axis. The axis will always start from this value, even if there is no data point mapped that far.

If this is set to true, the values will be reversed on the value axis – the largest value will be placed closest to the point where the category and value axes intersect. The chart will be re-plotted accordingly.

The angle of rotation for the values. You can rotate them by 90 degrees with no additional requirements. If you want to rotate the values by 1 to 89 degrees, you must have the SWF file for that font, placed in the amcolumn/fonts folder.

If this is set to true, the first value will be skipped.

If this is set to true, the last value will be skipped.

If this is set to true, the axis will stay between Min and Max values even if there are data points beyond those values. The parts of the chart that do not fit will be cropped. If this is set to false, the Min and Max values will be extended to fit the chart.

The size of the text.

A short text indicating the units of the values. This can be something like “USD” or “km/h”.

Whether the units will be shown to the left of the value or to the right.

Labels to add to the chart

If this is set to true labels will be rendered with data instead of settings

Alignment of legend entries

Legend background opacity [0-100]

Opacity of Legend border [0-100]

Legend border color

Legend background color

Specifies if Legend should be visible

Gradient legend background colors

If this is set to true, the key has a checkbox function – clicking on it will hide or show the corresponding graph.

Legend Key (the color box near every legend entry) border color

The color of the check mark in the key. (Only applies if graph_on_off is true.)

Legend Key (the color box near every legend entry) size

Left coordinate of the Legend

If set to true left coordinate of the Legend is measured from the right side

Legend margins (space between legend border and legend entries, recommended to use only if legend border is visible or background color is different from chart area background color)

Maximum number of columns in the Legend

whether to sort legend entries in a reverse order

Vertical and horizontal gap between legend entries

Legend text color

The color of the legend item text when the mouse pointer hovers over it.

Legend text size

Top coordinate of the Legend. If empty, will be below the pie

If set to true top coordinate of the Legend is measured from the bottom

The alignment of the text in the legend.

If this is set to true, the values will be shown in the legend.

The value of the entry. Tags in curly brackets { } will be replaced with the information taken from the data file. The following tags are available: title value series description percents

The width of the text in the legend. This is useful if you want all entries to be right-aligned.

Width of the Legend. If empty, will be equal to control width-80

The target parameter of the bullet URL, if any. The value is the same as the <target=““> tag in HTML. Use “_blank” to open the URL in a new browser window.

Text displayed while loading chart data

Text displayed while loading chart settings

Gets a value indicating whether the control participates in loading its view state by ID instead of index.

The size of the bottom margin.

The size of the left margin.

The size of the right margin.

The size of the top margin.

Gets a reference to the server control's naming container, which creates a unique namespace for differentiating between server controls with the same ID property value.

if data is missing, this message will be displayed

If this is set to true, only one graph balloon will be visible at any time. This will be the balloon, and its connecting line, which are currently closest to the mouse pointer.

Gets a reference to the Page instance that contains the server control.

Gets a reference to the server control's parent control in the page control hierarchy.

The opacity of the plot area’s background. Change this from 0 to make the plot area background different from the chart background.

The background color of the plot area.

Gradient plot area background colors

The opacity of the plot area's borders.

The color of the plot area’s borders.

Shows how many numbers should be shown after comma for calculated values (percents)

Color of the background while chart is loading data and settings

Color of the preloader bar and text

If your chart's width or height is set in percents, and redraw is set to true, the chart will be redrawn then screen size changes

How often data should be reloaded (time in seconds). Works only when data is loaded from external file

Gets or sets a value indicating whether the DataBind()()() method should be called.

When you show or hide graphs, the chart recalculates min and max values (rescales the chart). If you don't want this, set this to false.

The opacity of the scroll bar indicator.

The opacity of the scroll bar background.

The color of the scroll bar background.

Gradient scroller background colors

The color of the scroll bar indicator.

If this is set to True, the scroll bar will be displayed when the chart is zoomed in.

Gradient scroller colors

The height of the scroll bar.

The vertical position of the scroll bar, in pixels, counting downwards from the top edge of the chart.

Gets a DataSourceSelectArguments object that the data-bound control uses when retrieving data from a data source control.

The opacity of the background of the selected area.

The background color of the area selected by clicking and dragging.

Chart series (category/X-axis) items

Whether to show preloader when data or settings are reloaded

Show flash players print menu?

Show flash players zoom menu?

Gets information about the container that hosts the current control when rendered on a design surface.

Gets or sets the skin to apply to the control.

If this is set to true, the graph will begin from the Y-axis. If this is set to false, the graph will begin in the plot area, half way between the Y-axis and the first X-axis point.

Gets a collection of text attributes that will be rendered as a style attribute on the outer tag of the Web server control.

Gets or sets the tab index of the Web server control.

Gets the HtmlTextWriterTag value that corresponds to this Web server control. This property is used primarily by control developers.

Gets the name of the control tag. This property is used primarily by control developers.

Gets or sets a reference to the template that contains this control.

Gets the virtual directory of the Page or UserControl that contains the current server control.

Thousands separator to be used in Flash

Gets or sets the text displayed when the mouse pointer hovers over the Web server control.

Gets the unique, hierarchically qualified identifier for the server control.

This message is displayed when user has no Flash Player or has an old Flash Player version

If this is set to true control will attempt to use ASP.NET AJAX methods to registrer client scripts

Opacity of vertical lines

in case you have more then one graph with vertical lines enabled, you might want to place your columns next to each other, set true for that.

as line chart by default starts on axis, and your column width is more than 0, then some part of first and last column will be outside plot area (incase you don't set StartOnAxis = false Mask will cut off the part outside the plot area. Set to false if you don't want this.

width of vertical line in percents. 0 for hairline. Set higher than 0 if you want to have column

Gets a dictionary of state information that allows you to save and restore the view state of a server control across multiple requests for the same page.

Gets a value that indicates whether the StateBag object is case-insensitive.

Gets or sets a value that indicates whether a server control is rendered as UI on the page.

This text will be displayed if you have zoomed in through Javascript controls, and the zoom values provided are wrong or missing.

The opacity of the axis line.

The color of the axis line.

The length of the tick extending from the axis at a grid or data point.

The thickness of the axis line. 0 means hairline, but still visible (set alpha=0 for an invisible axis line).

If this is set to true, a balloon will mark the indicator’s current position on the X-axis.

The color of the X-axis balloon text.

The opacity of the grid lines.

The approximate number of gridlines. They will be arranged along the plot area equally, intersecting with X-axis value points.

The color of the grid lines.

If this is set to true, the grid lines will not be continuous. They will look like a line of dashes (– – – –).

The length of each dash.

If this is set to true, vertical grid lines will be displayed.

The color of the text.

If this is set to true, axis values will be shown.

The ratio of shown values to grid lines. 1 means a value will be shown at every grid line; 2 means a value will be shown at every second grid line, etc. The higher the number, the less values will be shown!

If this is set to true, the values of this axis will be displayed inside the plot area.

The angle of rotation for the values. You can rotate them by 90 degrees with no additional requirements. If you want to rotate the values by 1 to 89 degrees, you must have the SWF file for that font, placed in the amcolumn/fonts folder.

If this is set to true, the first value will be skipped.

If this is set to true, the last value will be skipped.

The size of the text.

The opacity of the zoom out button background.

The color of the zoom out button background.

The horizontal position of the zoom out button.

The text on the button.

The color of the zoom out button text.

The color of the button’s text when the mouse pointer hovers over it.

The size of the button’s text.

The vertical position of the zoom out button. The coordinates are counted from the upper left corner. (Coordinates are still positive, though counted downwards.)