Type interface
Inheritance
ISimpleLineSeriesSettings extends IDrawingSeriesSettings
.
ISimpleLineSeriesSettings is extended by IAverageSeriesSettings
, IFibonacciSeriesSettings
, IHorizontalLineSeriesSettings
, IHorizontalRaySeriesSettings
, IRectangleSeriesSettings
, IParallelChannelSeriesSettings
, IQuadrantLineSeriesSettings
, IRegressionSeriesSettings
, ITrendLineSeriesSettings
, IVerticalLineSeriesSettings
.
Properties
active # |
Type Inherited from Indicates if element is currently active. |
---|---|
autoGapCount # |
Type Default Inherited from If there are more than Click here for more info |
background # |
Type Inherited from Background element. Click here for more info |
baseAxis # |
Type Inherited from Base axis for the series. A base axis will dictate direction series plot. Click here for more info |
blur # |
Type Inherited from Apply blur filter. Ranges of values in pixels: IMPORTANT: This setting is not supported in Safari browsers. Click here for more info |
brightness # |
Type Inherited from Modifty visual brightness. Range of values: IMPORTANT: This setting is not supported in Safari browsers. Click here for more info |
calculateAggregates # |
Type Inherited from If set to Do not enable unless you are using such aggregate values in tooltips, display data fields, heat rules, or similar. |
categoryXField # |
Type Inherited from Input data field for X category. Click here for more info |
categoryYField # |
Type Inherited from Input data field for Y category. Click here for more info |
centerX # |
Type Inherited from X coordinate of the center of the element relative to itself. Center coordinates will affect placement as well as rotation pivot point. |
centerY # |
Type Inherited from Y coordinate of the center of the element relative to itself. Center coordinates will affect placement as well as rotation pivot point. |
connect # |
Type Default Inherited from If set to Click here for more info |
contrast # |
Type Inherited from Modify contrast. Range of values: IMPORTANT: This setting is not supported in Safari browsers. Click here for more info |
crisp # |
Type Default Inherited from If set to It will round x/y position so it is positioned fine "on pixel". It will also adjust NOTE: this is might not universally work, especially when set on several objects that are supposed to fit perfectly with each other. @since 5.3.0 |
cursorOverStyle # |
Type Inherited from A named mouse cursor style to show when hovering this element. Click here for more info |
customValueField # |
Type Inherited from A key to look up in data for a numeric customValue of the data item. Usually used for storing additional numeric information and heat rules. |
dateFormatter # |
Type Inherited from An instance of Click here for more info |
disabled # |
Type Inherited from Indicates if element is disabled. |
draggable # |
Type Inherited from If set to |
durationFormatter # |
Type Inherited from An instance of Click here for more info |
dx # |
Type Inherited from Horizontal shift in pixels. Can be negative to shift leftward. |
dy # |
Type Inherited from Vertical shift in pixels. Can be negative to shift upward. |
excludeFromTotal # |
Type Default Inherited from Exclude series values when calculating totals for category/interval. |
exportable # |
Type Inherited from If set to |
field # |
Type Default Inherited from Value field to use when snapping data or calculating averages/regresions/etc. |
fill # |
Type Inherited from Series fill color. Click here for more info |
fillColor # |
Type Inherited from Color of the fills. |
fillOpacity # |
Type Inherited from Opacity of the fills (0-1). |
fillPattern # |
Type Inherited from Series fill pattern. Click here for more info |
forceHidden # |
Type Inherited from If set to |
forceInactive # |
Type Inherited from If set to @since 5.0.21 |
groupDataCallback # |
Type Inherited from A custom function to call when grouping data items. Click here for more info |
groupDataDisabled # |
Type Inherited from If set to @since 5.0.19 |
groupDataWithOriginals # |
Type Default Inherited from If set to Please note that if @since 5.1.11 |
heatRules # |
Type Inherited from A list of heat rules to apply on series elements. Click here for more info |
height # |
Type Inherited from Element's absolute height in pixels (numeric value) or relative height to parent ( |
highLocationX # |
Type Default Inherited from Horizontal location of the high data point relative to its cell. |
highLocationY # |
Type Default Inherited from Vertical location of the high data point relative to its cell. |
highValueXField # |
Type Inherited from Input data field for X high value. Click here for more info |
highValueXGrouped # |
Type Inherited from Indicates what aggregate value to use for collective data item, when aggregating X high values from several data items. |
highValueXShow # |
Type Inherited from Display data field for X high value. |
highValueYField # |
Type Inherited from Input data field for Y high value. Click here for more info |
highValueYGrouped # |
Type Inherited from Indicates what aggregate value to use for collective data item, when aggregating X high values from several data items. |
highValueYShow # |
Type Inherited from Display data field for Y low value. |
html # |
Type Inherited from HTML content of the container. Click here for more info |
hue # |
Type Inherited from Rotate HUE colors in degrees. Range of values: IMPORTANT: This setting is not supported in Safari browsers. Click here for more info |
id # |
Type Inherited from A custom string ID for the element. If set, element can be looked up via Will raise error if an element with the same ID already exists. |
idField # |
Type Inherited from A key to look up in data for an id of the data item. |
ignoreMinMax # |
Type Default Inherited from If set to |
interactive # |
Type Inherited from Should this element accept user interaction events? |
interactiveChildren # |
Type Inherited from If set to |
interpolationDuration # |
Type Inherited from A duration of the animation from one setting value to another, in milliseconds. Click here for more info |
interpolationEasing # |
Type Inherited from Easing function to use for cross setting value animations. Click here for more info |
invert # |
Type Inherited from Invert colors. Range of values: IMPORTANT: This setting is not supported in Safari browsers. Click here for more info |
isMeasured # |
Type Inherited from If set to |
layer # |
Type Inherited from Numeric layer to put element in. Elements with higher number will appear in front of the ones with lower numer. If not set, will inherit layer from its ascendants. |
layerMargin # |
Type Inherited from Margins for the layer. Can be used to make the layer larger/or smaller than default chart size. @since @5.2.39 |
layout # |
Type Inherited from A method to layout Click here for more info |
legendDataItem # |
Type Inherited from A data item representing series in a @readonly |
legendLabelText # |
Type Inherited from A text template to be used for label in legend. |
legendRangeLabelText # |
Type Inherited from Text to use for series legend label when no particular category/interval is selected. |
legendRangeValueText # |
Type Inherited from Text to use for series legend value label when no particular category/interval is selected. |
legendValueText # |
Type Inherited from A text template to be used for value label in legend. |
locationX # |
Type Default Inherited from Horizontal location of the data point relative to its cell. Click here for more info |
locationY # |
Type Default Inherited from Vertical location of the data point relative to its cell. Click here for more info |
lowLocationX # |
Type Default Inherited from Horizontal location of the low data point relative to its cell. |
lowLocationY # |
Type Default Inherited from Vertical location of the low data point relative to its cell. |
lowValueXField # |
Type Inherited from Input data field for X low value. Click here for more info |
lowValueXGrouped # |
Type Inherited from Indicates what aggregate value to use for collective data item, when aggregating X low values from several data items. |
lowValueXShow # |
Type Inherited from Display data field for X low value. |
lowValueYField # |
Type Inherited from Input data field for Y low value. Click here for more info |
lowValueYGrouped # |
Type Inherited from Indicates what aggregate value to use for collective data item, when aggregating Y low values from several data items. |
lowValueYShow # |
Type Inherited from Display data field for Y low value. |
marginBottom # |
Type Inherited from Bottom margin in pixels. |
marginLeft # |
Type Inherited from Left margin in pixels. |
marginRight # |
Type Inherited from Right margin in pixels. |
marginTop # |
Type Inherited from Top margin in pixels. |
mask # |
Type Inherited from An element to use as a container's mask (clipping region). Click here for more info |
maskBullets # |
Type Inherited from If set to |
maskContent # |
Type Inherited from If set to |
maxHeight # |
Type Inherited from Maximum allowed height in pixels. |
maxWidth # |
Type Inherited from Maximum allowed width in pixels. |
minBulletDistance # |
Type Inherited from Minimal distance between data items in pixels. If data items are closer than this, bullets are turned off to avoid overcrowding. Click here for more info |
minDistance # |
Type Default Inherited from Allows simplifying the line with many points. If set, the series will skip points that are closer than X pixels to each other. With many data points, this allows having smoother, less cluttered lines. @since 5.2.7 |
minHeight # |
Type Inherited from Minimum allowed height in pixels. |
minWidth # |
Type Inherited from Minimum allowed width in pixels. |
name # |
Type Inherited from Name of the series. |
numberFormatter # |
Type Inherited from An instance of Click here for more info |
opacity # |
Type Inherited from Opacity. 0 - fully transparent; 1 - fully opaque. |
openCategoryXField # |
Type Inherited from Display data field for X category. Click here for more info |
openCategoryYField # |
Type Inherited from Display data field for Y category. Click here for more info |
openLocationX # |
Type Default Inherited from Horizontal location of the open data point relative to its cell. |
openLocationY # |
Type Default Inherited from Vertical location of the open data point relative to its cell. |
openValueXField # |
Type Inherited from Input data field for X open value. Click here for more info |
openValueXGrouped # |
Type Inherited from Display data field for Y open value. Click here for more info |
openValueXShow # |
Type Inherited from Display data field for X open value. Click here for more info |
openValueYField # |
Type Inherited from Input data field for X open value. Click here for more info |
openValueYGrouped # |
Type Inherited from Display data field for Y open value. Click here for more info |
openValueYShow # |
Type Inherited from Display data field for Y open value. Click here for more info |
paddingBottom # |
Type Inherited from Bottom padding in pixels. |
paddingLeft # |
Type Inherited from Left padding in pixels. |
paddingRight # |
Type Inherited from Right padding in pixels. |
paddingTop # |
Type Inherited from Top padding in pixels. |
position # |
Type Inherited from Positioning of the element. |
reverseChildren # |
Type Inherited from If set to @since 5.1.1 |
rotation # |
Type Inherited from Rotation in degrees. |
saturate # |
Type Inherited from Modify saturation. Range of values in pixels:
Click here for more info |
scale # |
Type Inherited from Scale. Setting to a value less than 1 will shrink object. |
selectorPadding # |
Type Default Inherited from Padding of a selector rectangle (how many pixels will be added to each side around the drawing when it's selected) |
sepia # |
Type Inherited from Apply sepia filter. Range of values: IMPORTANT: This setting is not supported in Safari browsers. Click here for more info |
sequencedDelay # |
Type Inherited from A delay in milliseconds to wait before starting animation of next data item. Click here for more info |
sequencedInterpolation # |
Type Inherited from If set to Click here for more info |
series # |
Type Inherited from
|
seriesTooltipTarget # |
Type Default Inherited from Whether series' tooltip should inherit its color from series or its first bullet. |
setStateOnChildren # |
Type Inherited from If set to Click here for more info |
showExtension # |
Type Default Show a dotted line extending from both ends of the drawn line. |
showTooltipOn # |
Type Default Inherited from Defines when tooltip is shown over the element. Available options:
Click here for more info |
snapTooltip # |
Type Inherited from If set to This setting is relevant only if |
stackToNegative # |
Type Inherited from Whether to stack negative values from zero ( Click here for more info |
stacked # |
Type Inherited from If set to NOTE: for series stack properly, all stacked series must have same number of data items with the same timestamp/category. Click here for more info |
stateAnimationDuration # |
Type Inherited from Duration of transition from one state to another. |
stateAnimationEasing # |
Type Inherited from Easing of transition from one state to another. |
stroke # |
Type Inherited from Series stroke color. Click here for more info |
strokeColor # |
Type Inherited from Color of the lines/borders. |
strokeDasharray # |
Type Inherited from Dash information for lines/borders. |
strokeOpacity # |
Type Inherited from Opacity of the lines/borders (0-1). |
strokeWidth # |
Type Inherited from Width of the lines/borders in pixels. |
templateField # |
Type Inherited from Allows binding element's settings to data. Click here for more info |
themeTags # |
Type Inherited from Tags which can be used by the theme rules. Click here for more info |
themeTagsSelf # |
Type Inherited from Tags which can be used by the theme rules. These tags only apply to this object, not any children. Click here for more info |
themes # |
Type Inherited from A list of themes applied to the element. |
toggleKey # |
Type Inherited from If set, element will toggle specified boolean setting between |
tooltip # |
Type Inherited from
|
tooltipDataItem # |
Type Inherited from A @since 5.1.2 |
tooltipHTML # |
Type Inherited from HTML content to show in a tooltip when hovered. @since 5.2.11 |
tooltipPosition # |
Type Inherited from Tooltip position. |
tooltipPositionX # |
Type Default Inherited from Indicates horizontal position at which to show series' tooltip at. @since 5.0.16 |
tooltipPositionY # |
Type Default Inherited from Indicates vertical position at which to show series' tooltip at. @since 5.0.16 |
tooltipText # |
Type Inherited from Text to show in a tooltip when hovered. |
tooltipX # |
Type Inherited from Tooltip pointer X coordinate relative to the element itself. |
tooltipY # |
Type Inherited from Tooltip pointer Y coordinate relative to the element itself. |
userData # |
Type Inherited from A storage for any custom user data that needs to be associated with the element. |
valueField # |
Type Inherited from A key to look up in data for a numeric value of the data item. Some series use it to display its elements. It can also be used in heat rules. |
valueXField # |
Type Inherited from Input data field for X value. Click here for more info |
valueXGrouped # |
Type Inherited from Indicates what aggregate value to use for collective data item, when aggregating X values from several data items. Click here for more info |
valueXShow # |
Type Inherited from Display data field for X value. Click here for more info |
valueYField # |
Type Inherited from Input data field for Y value. Click here for more info |
valueYGrouped # |
Type Inherited from Indicates what aggregate value to use for collective data item, when aggregating X values from several data items. Click here for more info |
valueYShow # |
Type Inherited from Display data field for Y value. Click here for more info |
verticalScrollbar # |
Type Inherited from Setting this to an instance of Click here for more info |
visible # |
Type Inherited from Is element visible? |
wheelable # |
Type Inherited from If set to |
width # |
Type Inherited from Element's absolute width in pixels (numeric value) or relative width to parent ( |
x # |
Type Inherited from X position relative to parent. |
xAxis # |
Type Inherited from X-Axis. |
y # |
Type Inherited from Y position relative to parent. |
yAxis # |
Type Inherited from Y-axis. |
There are 156 inherited items currently hidden from this list. |