ISmoothedRadarLineSeriesSettings – amCharts 5 Documentation

Type interface

Inheritance

ISmoothedRadarLineSeriesSettings extends IRadarLineSeriesSettings.

ISmoothedRadarLineSeriesSettings is not extended by any other symbol.

Properties

active #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` Indicates if element is currently active.
autoGapCount #	Type `undefined` \| `number` Default `1.1` Inherited from `ILineSeriesSettings` If there are more than `autoGapCount` base time intervals (e.g. days) with no data, the line will break and will display gap. Click here for more info
background #	Type `Graphics` Inherited from `IContainerSettings` Background element. Click here for more info
baseAxis #	Type `IXYAxis` Inherited from `IXYSeriesSettings` Base axis for the series. A base axis will dictate direction series plot. Click here for more info
blur #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Apply blur filter. Ranges of values in pixels: `0` to `X`. IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
brightness #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Modifty visual brightness. Range of values: `0` to `1`. IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
calculateAggregates #	Type `undefined` \| `false` \| `true` Inherited from `ISeriesSettings` If set to `true`, series will calculate aggregate values, e.g. change percent, high, low, etc. Do not enable unless you are using such aggregate values in tooltips, display data fields, heat rules, or similar.
categoryXField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for X category. Click here for more info
categoryYField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for Y category. Click here for more info
centerX #	Type `number` \| `Percent` Inherited from `ISpriteSettings` X coordinate of the center of the element relative to itself. Center coordinates will affect placement as well as rotation pivot point.
centerY #	Type `number` \| `Percent` Inherited from `ISpriteSettings` Y coordinate of the center of the element relative to itself. Center coordinates will affect placement as well as rotation pivot point.
connect #	Type `undefined` \| `false` \| `true` Default `true` Inherited from `ILineSeriesSettings` If set to `true` the line will connect over "gaps" - categories or time intervals with no data. Click here for more info
connectEnds #	Type `undefined` \| `false` \| `true` Default `@true` Inherited from `IRadarLineSeriesSettings` If set to `true` (default), series will connect its last data point to the first one with a line, thus completing full circle. Click here for more info
contrast #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Modify contrast. Range of values: `0` to `1`. IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
crisp #	Type `undefined` \| `false` \| `true` Default `false` Inherited from `ISpriteSettings` If set to `true`, an element will try to draw itself in such way, that it looks crisp on screen, with minimal anti-aliasing. It will round x/y position so it is positioned fine "on pixel". It will also adjust `strokeWidth` based on device pixel ratio or zoom, so the line might look thinner than expected. NOTE: this is might not universally work, especially when set on several objects that are supposed to fit perfectly with each other. @since 5.3.0
cursorOverStyle #	Type `undefined` \| `string` Inherited from `ISpriteSettings` A named mouse cursor style to show when hovering this element. Click here for more info
customValueField #	Type `undefined` \| `string` Inherited from `ISeriesSettings` A key to look up in data for a numeric customValue of the data item. Usually used for storing additional numeric information and heat rules.
dateFormatter #	Type `DateFormatter` \| `undefined` Inherited from `ISpriteSettings` An instance of `DateFormatter` that should be used instead of global formatter object. Click here for more info
disabled #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` Indicates if element is disabled.
draggable #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` If set to `true`, user will be able to drag this element. It will also disable default drag events over the area of this element.
durationFormatter #	Type `DurationFormatter` \| `undefined` Inherited from `ISpriteSettings` An instance of `DurationFormatter` that should be used instead of global formatter object. Click here for more info
dx #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Horizontal shift in pixels. Can be negative to shift leftward.
dy #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Vertical shift in pixels. Can be negative to shift upward.
excludeFromTotal #	Type `undefined` \| `false` \| `true` Default `false` Inherited from `IXYSeriesSettings` Exclude series values when calculating totals for category/interval.
exportable #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` If set to `false` this element will not appear in exported snapshots of the chart.
fill #	Type `Color` Inherited from `ISeriesSettings` Series fill color. Click here for more info
fillPattern #	Type `Pattern` Inherited from `ISeriesSettings` Series fill pattern. Click here for more info @since 5.10.0
forceHidden #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` If set to `true` the element will be hidden regardless of `visible` or even if `show()` is called.
forceInactive #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` If set to `true` the element will be inactive - absolutely oblivious to all interactions, even if there are related events set, or the `interactive: true` is set. @since 5.0.21
groupDataCallback #	Type `undefined` \| ( dataItem: `DataItem`, interval: `ITimeInterval`) => `void` Inherited from `IXYSeriesSettings` A custom function to call when grouping data items. Click here for more info @since 5.1.11
groupDataDisabled #	Type `undefined` \| `false` \| `true` Inherited from `IXYSeriesSettings` If set to `true` data items for this series won't be grouped even if the `groupData: true` is set on a related `DateAxis`. @since 5.0.19
groupDataWithOriginals #	Type `undefined` \| `false` \| `true` Default `false` Inherited from `IXYSeriesSettings` If set to `true`, when data is grouped, the `originals` setting of the group data items will be populated by the original (source) data items that fall into the group. Please note that if `groupDataCallback` is set, this setting is ignored as originals will always be included, regardless of the value. @since 5.1.11
heatRules #	Type `IHeatRule[]` Inherited from `ISeriesSettings` A list of heat rules to apply on series elements. Click here for more info
height #	Type `number` \| `Percent` \| `null` Inherited from `ISpriteSettings` Element's absolute height in pixels (numeric value) or relative height to parent (`Percent`);
highLocationX #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Horizontal location of the high data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end.
highLocationY #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Vertical location of the high data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end.
highValueXField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for X high value. Click here for more info
highValueXGrouped #	Type `"open"` \| `"close"` \| `"high"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Indicates what aggregate value to use for collective data item, when aggregating X high values from several data items.
highValueXShow #	Type `"highValueXWorking"` \| `"highValueXChange"` \| `"highValueXChangePercent"` \| `"highValueXChangeSelection"` \| `"highValueXChangeSelectionPercent"` \| `"highValueXChangePrevious"` \| `"highValueXChangePreviousPercent"` Inherited from `IXYSeriesSettings` Display data field for X high value.
highValueYField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for Y high value. Click here for more info
highValueYGrouped #	Type `"open"` \| `"close"` \| `"high"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Indicates what aggregate value to use for collective data item, when aggregating X high values from several data items.
highValueYShow #	Type `"highValueYWorking"` \| `"highValueYChange"` \| `"highValueYChangePercent"` \| `"highValueYChangeSelection"` \| `"highValueYChangeSelectionPercent"` \| `"highValueYChangePrevious"` \| `"highValueYChangePreviousPercent"` Inherited from `IXYSeriesSettings` Display data field for Y low value.
html #	Type `undefined` \| `string` Inherited from `IContainerSettings` HTML content of the container. Click here for more info @since 5.2.11
hue #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Rotate HUE colors in degrees. Range of values: `0` to `360`. IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
id #	Type `undefined` \| `string` Inherited from `IEntitySettings` A custom string ID for the element. If set, element can be looked up via `am5.registry.entitiesById`. Will raise error if an element with the same ID already exists.
idField #	Type `undefined` \| `string` Inherited from `ISeriesSettings` A key to look up in data for an id of the data item.
ignoreMinMax #	Type `undefined` \| `false` \| `true` Default `false` Inherited from `IXYSeriesSettings` If set to `true` this series will be ignored when calculating scale of the related axes.
interactive #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` Should this element accept user interaction events?
interactiveChildren #	Type `undefined` \| `false` \| `true` Inherited from `IContainerSettings` If set to `true` all descendants - not just direct children, but every element in it - will become "interactive".
interpolationDuration #	Type `undefined` \| `number` Inherited from `IComponentSettings` A duration of the animation from one setting value to another, in milliseconds. Click here for more info
interpolationEasing #	Type `$ease.Easing` Inherited from `IComponentSettings` Easing function to use for cross setting value animations. Click here for more info
invert #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Invert colors. Range of values: `0` (no changes) to `1` (completely inverted colors). IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
isMeasured #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` If set to `false` element will not be measured and cannot participate in layout schemes.
layer #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Numeric layer to put element in. Elements with higher number will appear in front of the ones with lower numer. If not set, will inherit layer from its ascendants.
layerMargin #	Type `IMargin` Inherited from `ISpriteSettings` Margins for the layer. Can be used to make the layer larger/or smaller than default chart size. @since @5.2.39
layout #	Type `Layout` \| `null` Inherited from `IContainerSettings` A method to layout Click here for more info
legendDataItem #	Type `DataItem` Inherited from `ISeriesSettings` A data item representing series in a `Legend`. @readonly
legendLabelText #	Type `undefined` \| `string` Inherited from `ISeriesSettings` A text template to be used for label in legend.
legendRangeLabelText #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Text to use for series legend label when no particular category/interval is selected.
legendRangeValueText #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Text to use for series legend value label when no particular category/interval is selected.
legendValueText #	Type `undefined` \| `string` Inherited from `ISeriesSettings` A text template to be used for value label in legend.
locationX #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Horizontal location of the data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end. Click here for more info
locationY #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Vertical location of the data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end. Click here for more info
lowLocationX #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Horizontal location of the low data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end.
lowLocationY #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Vertical location of the low data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end.
lowValueXField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for X low value. Click here for more info
lowValueXGrouped #	Type `"open"` \| `"close"` \| `"low"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Indicates what aggregate value to use for collective data item, when aggregating X low values from several data items.
lowValueXShow #	Type `"lowValueXWorking"` \| `"lowValueXChange"` \| `"lowValueXChangePercent"` \| `"lowValueXChangeSelection"` \| `"lowValueXChangeSelectionPercent"` \| `"lowValueXChangePrevious"` \| `"lowValueXChangePreviousPercent"` Inherited from `IXYSeriesSettings` Display data field for X low value.
lowValueYField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for Y low value. Click here for more info
lowValueYGrouped #	Type `"open"` \| `"close"` \| `"low"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Indicates what aggregate value to use for collective data item, when aggregating Y low values from several data items.
lowValueYShow #	Type `"lowValueYWorking"` \| `"lowValueYChange"` \| `"lowValueYChangePercent"` \| `"lowValueYChangeSelection"` \| `"lowValueYChangeSelectionPercent"` \| `"lowValueYChangePrevious"` \| `"lowValueYChangePreviousPercent"` Inherited from `IXYSeriesSettings` Display data field for Y low value.
marginBottom #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Bottom margin in pixels.
marginLeft #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Left margin in pixels.
marginRight #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Right margin in pixels.
marginTop #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Top margin in pixels.
mask #	Type `Graphics` \| `null` Inherited from `IContainerSettings` An element to use as a container's mask (clipping region). Click here for more info
maskBullets #	Type `undefined` \| `false` \| `true` Inherited from `IXYSeriesSettings` If set to `true`, series bullets will be masked by plot area.
maskContent #	Type `undefined` \| `false` \| `true` Inherited from `IContainerSettings` If set to `true` all content going outside the bounds of the container will be clipped.
maxHeight #	Type `number` \| `null` Inherited from `ISpriteSettings` Maximum allowed height in pixels.
maxWidth #	Type `number` \| `null` Inherited from `ISpriteSettings` Maximum allowed width in pixels.
minBulletDistance #	Type `undefined` \| `number` Inherited from `IXYSeriesSettings` Minimal distance between data items in pixels. If data items are closer than this, bullets are turned off to avoid overcrowding. Click here for more info
minDistance #	Type `undefined` \| `number` Default `0` Inherited from `ILineSeriesSettings` Allows simplifying the line with many points. If set, the series will skip points that are closer than X pixels to each other. With many data points, this allows having smoother, less cluttered lines. @since 5.2.7
minHeight #	Type `number` \| `null` Inherited from `ISpriteSettings` Minimum allowed height in pixels.
minWidth #	Type `number` \| `null` Inherited from `ISpriteSettings` Minimum allowed width in pixels.
name #	Type `undefined` \| `string` Inherited from `ISeriesSettings` Name of the series.
numberFormatter #	Type `NumberFormatter` \| `undefined` Inherited from `ISpriteSettings` An instance of `NumberFormatter` that should be used instead of global formatter object. Click here for more info
opacity #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Opacity. 0 - fully transparent; 1 - fully opaque.
openCategoryXField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Display data field for X category. Click here for more info
openCategoryYField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Display data field for Y category. Click here for more info
openLocationX #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Horizontal location of the open data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end.
openLocationY #	Type `undefined` \| `number` Default `0.5` Inherited from `IXYSeriesSettings` Vertical location of the open data point relative to its cell. `0` - beginning, `0.5` - middle, `1` - end.
openValueXField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for X open value. Click here for more info
openValueXGrouped #	Type `"open"` \| `"close"` \| `"low"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Display data field for Y open value. Click here for more info
openValueXShow #	Type `"openValueXWorking"` \| `"openValueXChange"` \| `"openValueXChangePercent"` \| `"openValueXChangeSelection"` \| `"openValueXChangeSelectionPercent"` \| `"openValueXChangePrevious"` \| `"openValueXChangePreviousPercent"` Inherited from `IXYSeriesSettings` Display data field for X open value. Click here for more info
openValueYField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for X open value. Click here for more info
openValueYGrouped #	Type `"open"` \| `"close"` \| `"low"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Display data field for Y open value. Click here for more info
openValueYShow #	Type `"openValueYWorking"` \| `"openValueYChange"` \| `"openValueYChangePercent"` \| `"openValueYChangeSelection"` \| `"openValueYChangeSelectionPercent"` \| `"openValueYChangePrevious"` \| `"openValueYChangePreviousPercent"` Inherited from `IXYSeriesSettings` Display data field for Y open value. Click here for more info
paddingBottom #	Type `undefined` \| `number` Inherited from `IContainerSettings` Bottom padding in pixels.
paddingLeft #	Type `undefined` \| `number` Inherited from `IContainerSettings` Left padding in pixels.
paddingRight #	Type `undefined` \| `number` Inherited from `IContainerSettings` Right padding in pixels.
paddingTop #	Type `undefined` \| `number` Inherited from `IContainerSettings` Top padding in pixels.
position #	Type `"absolute"` \| `"relative"` Inherited from `ISpriteSettings` Positioning of the element. `"absolute"` means element will not participate in parent layout scheme, and will be positioned solely accoridng its `x` and `y` settings.
reverseChildren #	Type `undefined` \| `false` \| `true` Inherited from `IContainerSettings` If set to `true` its children will be laid out in opposite order. @since 5.1.1
rotation #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Rotation in degrees.
saturate #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Modify saturation. Range of values in pixels: `0` to `X`. `0` - grayscale `1` - no changes `>1` - more saturated IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
scale #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Scale. Setting to a value less than 1 will shrink object.
sepia #	Type `undefined` \| `number` Inherited from `ISpriteSettings` Apply sepia filter. Range of values: `0` (no changes) to `1` (complete sepia). IMPORTANT: This setting is not supported in Safari browsers. Click here for more info @since 5.5.0
sequencedDelay #	Type `undefined` \| `number` Inherited from `ISeriesSettings` A delay in milliseconds to wait before starting animation of next data item. Click here for more info
sequencedInterpolation #	Type `undefined` \| `false` \| `true` Inherited from `ISeriesSettings` If set to `true` the series initial animation will be played item by item rather than all at once. Click here for more info
seriesTooltipTarget #	Type `"series"` \| `"bullet"` Default `"series"` Inherited from `IXYSeriesSettings` Whether series' tooltip should inherit its color from series or its first bullet.
setStateOnChildren #	Type `undefined` \| `false` \| `true` Inherited from `IContainerSettings` If set to `true`, applying a state on a container will also apply the same state on its children. Click here for more info
showTooltipOn #	Type `"hover"` \| `"always"` \| `"click"` Default `"hover"` Inherited from `ISpriteSettings` Defines when tooltip is shown over the element. Available options: `"hover"` (default) - tooltip is shown when element is hovered by a pointer or touched. It is hidden as soon as element is not hovered anymore, or touch occurs outside it. `"always"` - a tooltip will always be shown over the element, without any interactions. Please note that if you need to show tooltips for multiple elements at the same time, you need to explicitly create a `Tooltip` instance and set element's `tooltip` setting with it. '"click"' - a tooltip will only appear when target element is clicked/tapped. Tooltip will hide when clicking anywhere else on the page. Click here for more info @since 5.0.16
snapTooltip #	Type `undefined` \| `false` \| `true` Inherited from `IXYSeriesSettings` If set to `true` `XYCursor` will show closest data item from series even if it is outside currently hovered date axis interval. This setting is relevant only if `baseAxis` is a date axis.
stackToNegative #	Type `undefined` \| `false` \| `true` Inherited from `IXYSeriesSettings` Whether to stack negative values from zero (`true`) or from whatever previous series value is (`false`). Click here for more info
stacked #	Type `undefined` \| `false` \| `true` Inherited from `IXYSeriesSettings` If set to `true` series will be stacked to other series that also have this setting set to `true`. NOTE: for series stack properly, all stacked series must have same number of data items with the same timestamp/category. Click here for more info
stateAnimationDuration #	Type `undefined` \| `number` Inherited from `IEntitySettings` Duration of transition from one state to another.
stateAnimationEasing #	Type `$ease.Easing` Inherited from `IEntitySettings` Easing of transition from one state to another.
stroke #	Type `Color` Inherited from `ISeriesSettings` Series stroke color. Click here for more info
templateField #	Type `undefined` \| `string` Inherited from `ISpriteSettings` Allows binding element's settings to data. Click here for more info
tension #	Type `undefined` \| `number` Default `0.5` Tension of curve. Click here for more info
themeTags #	Type `Array` Inherited from `IEntitySettings` Tags which can be used by the theme rules. Click here for more info
themeTagsSelf #	Type `Array` Inherited from `IEntitySettings` Tags which can be used by the theme rules. These tags only apply to this object, not any children. Click here for more info
themes #	Type `Array` Inherited from `IEntitySettings` A list of themes applied to the element.
toggleKey #	Type `"disabled"` \| `"active"` \| `"none"` \| `undefined` Inherited from `ISpriteSettings` If set, element will toggle specified boolean setting between `true` and `false` when clicked/touched.
tooltip #	Type `Tooltip` Inherited from `ISpriteSettings` `Tooltip` instance.
tooltipDataItem #	Type `DataItem` Inherited from `IXYSeriesSettings` A `DataItem` that is being used for current tooltip, e.g. by a chart cursor. @since 5.1.2
tooltipHTML #	Type `undefined` \| `string` Inherited from `ISpriteSettings` HTML content to show in a tooltip when hovered. @since 5.2.11
tooltipPosition #	Type `"fixed"` \| `"pointer"` Inherited from `ISpriteSettings` Tooltip position.
tooltipPositionX #	Type `"open"` \| `"value"` \| `"low"` \| `"high"` Default `"value"` Inherited from `IXYSeriesSettings` Indicates horizontal position at which to show series' tooltip at. @since 5.0.16
tooltipPositionY #	Type `"open"` \| `"value"` \| `"low"` \| `"high"` Default `"value"` Inherited from `IXYSeriesSettings` Indicates vertical position at which to show series' tooltip at. @since 5.0.16
tooltipText #	Type `undefined` \| `string` Inherited from `ISpriteSettings` Text to show in a tooltip when hovered.
tooltipX #	Type `number` \| `Percent` Inherited from `ISpriteSettings` Tooltip pointer X coordinate relative to the element itself.
tooltipY #	Type `number` \| `Percent` Inherited from `ISpriteSettings` Tooltip pointer Y coordinate relative to the element itself.
userData #	Type `any` Inherited from `IEntitySettings` A storage for any custom user data that needs to be associated with the element.
valueField #	Type `undefined` \| `string` Inherited from `ISeriesSettings` A key to look up in data for a numeric value of the data item. Some series use it to display its elements. It can also be used in heat rules.
valueXField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for X value. Click here for more info
valueXGrouped #	Type `"open"` \| `"close"` \| `"low"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Indicates what aggregate value to use for collective data item, when aggregating X values from several data items. Click here for more info
valueXShow #	Type `"valueXWorking"` \| `"valueXChange"` \| `"valueXChangePercent"` \| `"valueXChangeSelection"` \| `"valueXChangeSelectionPercent"` \| `"valueXChangePrevious"` \| `"valueXChangePreviousPercent"` \| `"valueXTotal"` \| `"valueXTotalPercent"` \| `"valueXSum"` Inherited from `IXYSeriesSettings` Display data field for X value. Click here for more info
valueYField #	Type `undefined` \| `string` Inherited from `IXYSeriesSettings` Input data field for Y value. Click here for more info
valueYGrouped #	Type `"open"` \| `"close"` \| `"low"` \| `"high"` \| `"average"` \| `"sum"` \| `"extreme"` Inherited from `IXYSeriesSettings` Indicates what aggregate value to use for collective data item, when aggregating X values from several data items. Click here for more info
valueYShow #	Type `"valueYWorking"` \| `"valueYChange"` \| `"valueYChangePercent"` \| `"valueYChangeSelection"` \| `"valueYChangeSelectionPercent"` \| `"valueYChangePrevious"` \| `"valueYChangePreviousPercent"` \| `"valueYTotal"` \| `"valueYTotalPercent"` \| `"valueYSum"` Inherited from `IXYSeriesSettings` Display data field for Y value. Click here for more info
verticalScrollbar #	Type `Scrollbar` Inherited from `IContainerSettings` Setting this to an instance of `Scrollbar` will enable vertical scrolling of content if it does not fit into the Container. Click here for more info
visible #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` Is element visible?
wheelable #	Type `undefined` \| `false` \| `true` Inherited from `ISpriteSettings` If set to `true`, mouse wheel events will be triggered over the element. It will also disable page scrolling using mouse wheel when pointer is over the element.
width #	Type `number` \| `Percent` \| `null` Inherited from `ISpriteSettings` Element's absolute width in pixels (numeric value) or relative width to parent (`Percent`);
x #	Type `number` \| `Percent` \| `null` Inherited from `ISpriteSettings` X position relative to parent.
xAxis #	Type `IXYAxis` Inherited from `IXYSeriesSettings` X axis series uses. IMPORTANT: `xAxis` needs to be set when creating the series. Updating this setting on previously created series object will not work.
y #	Type `number` \| `Percent` \| `null` Inherited from `ISpriteSettings` Y position relative to parent.
yAxis #	Type `IXYAxis` Inherited from `IXYSeriesSettings` Y axis series uses. IMPORTANT: `yAxis` needs to be set when creating the series. Updating this setting on previously created series object will not work.
There are 148 inherited items currently hidden from this list.